Larmhelvete

[snettovint]

E de möjligt att kasta bort larmmodulen och ersätta med ett vanligt blinkrelä,anar att de behövs lite klippa o klistra i kabelhärvan.
Funderingen gäller en 01 fet pojke med förgasare

[Pulare]

Ja byt ut larmet mot denna
68921-01D
MODULE TURN SIGNAL CANCELLER

[snettovint]

Tackarobockar

[Pulare]

Får du inte tag i en TSM modul så ska du kunna använda denna https://namzcustomcycleproducts.com/...onnector-copy/

[snettovint]

Bytt till rek badlander vill inte funka ingen kontakt med resten av moppen. Tipps?

[Pulare]

Du behöver lära in modulen.


1
Install new TSM/TSSM or ECM. If vehicle
has fuel injection, continue with step
2. If vehicle does not have fuel injection,
perform all steps under 8.29
TSM/TSSM KEY FOB AND CODE
ASSIGNMENT.
2 Set RUN/OFF switch to RUN
Verify that security lamp is not
blinking (vehicle is disarmed)
3 Turn IGN key ON TSSM enables starter relay
4 Press starter button 1 time vehicle starts and stalls
No stored password for new
part causes bad password
DTC, fuel flow is stopped
5 Wait 10 seconds security lamp illuminates
ECM enters password learning
mode. If IGN key is cycled,
learning mode exits
6
After 10 minutes, ECM completes auto
learn mode
security lamp turns off
7 Quickly turn IGN key OFF-ON
ECM must not be allowed to
shutdown
8 Repeat steps 5-7 two more times
7 Turn IGN key OFF
Allow 15 seconds before
turning IGN key back ON
8
Password learning is complete. Perform
all steps under 8.29 TSM/TSSM KEY